PU Injection Grouting & Leak Sealing
PU Injection for Ceiling, Slab & Wall Leaks in Klang Valley
When water drips through a crack in a concrete ceiling, car porch or basement wall, the path runs through the structure itself. Painting over it does nothing; the water simply finds its way round.
Polyurethane (PU) injection seals that path from the inside. We drill along the crack, fit injection packers and pump PU resin in under pressure. The resin reacts with the water, expands into a flexible foam and blocks the crack. It works on active leaks, so there is no need to wait for a dry week.

When PU Injection Is the Right Fix for a Concrete Leak
- Water dripping from a visible crack in the ceiling slab after rain
- Wet lines along a car porch or balcony slab soffit
- Seepage through basement or lift-pit walls
- Leaks at construction joints or around pipe penetrations
- White salt deposits (efflorescence) tracing a crack line
Our PU Injection Process, Step by Step
- 1
Trace the crack
We map the full crack line and mark the wettest sections, because injecting only the drip point usually moves the leak a few inches along.
- 2
Drill and fit packers
Holes are drilled at an angle to meet the crack inside the slab, and steel packers are fitted at regular spacing.
- 3
Inject PU resin
Resin is pumped from the lowest packer upwards until it appears at the next one, so the crack fills completely.
- 4
Trim and patch
Once cured, packers are removed and the drill holes are patched and finished.
- 5
Water test
We check the area under water or after rain so you can see the drip has stopped.
PU Injection Materials and Where Each One Works
Hydrophobic PU resin
Expands with water and resists washing out. Our default for active, running leaks.
Hydrophilic PU resin
Absorbs water and stays flexible, suited to joints that move slightly.
Acrylic gel injection
For curtain grouting behind basement walls where the crack pattern is widespread.
Fast Plug
A rapid-setting cement plug used to stop a gushing hole before injection.
PU Injection Grouting & Leak Sealing Prices in Puchong, KL & Selangor
Three common scopes for this service. The price that applies depends on what the inspection finds.
| Option | Single crack / few points | Multiple cracks | Basement / joint system |
|---|---|---|---|
| Typical price | Typical from RM450 | Quoted per metre or point | Quoted after inspection |
| Best for | One leaking crack or joint | Car porch or ceiling with several lines | Basements, lift pits, long joints |
| Crack mapping before drilling | ✓ | ✓ | ✓ |
| Packer removal and hole patching | ✓ | ✓ | ✓ |
| Curtain or joint grouting | – | – | ✓ |
| Final price & warranty | In written quotation | In written quotation | In written quotation |
| Exact quotation | Upon request after inspection | Upon request after inspection | Upon request after inspection |
Typical common jobs range from RM450 to RM1,800. The final price and warranty are stated in your written quotation after site inspection, based on the system and job scope (case by case). Exact quotation upon request. Any transport surcharge, if applicable, is confirmed with you during enquiry.
PU Injection Job Photos from Leak Buster Sites




Related recent jobs
PU Injection to Stop a Dripping Ceiling Crack
Active leak through a concrete slab crack sealed by PU injection: drilling, packers, resin injection and patching.
Expansion Joint Sealing on a Commercial Building
Leaking expansion joints sealed and waterproofed so the building can move without letting water through.
PU Injection FAQs
Can PU injection be done while it is raining or leaking?
Yes. PU resin reacts with water, so injection is often most effective while the crack is wet and the leak path is visible.
Is PU injection permanent?
It is a long-lasting repair for that crack, but new cracks can form if the slab keeps moving. That is why we also check whether the membrane above is failing.
How is PU injection priced?
Usually per injection point or per metre of crack, depending on the job. Small single-crack jobs typically start from RM450, and you get an itemized quotation after inspection.
Will there be a lot of mess?
Drilling makes some dust and the resin can stain, so we cover the area below. Holes are patched after the packers come out.
Related Waterproofing Services & Areas Covered
No-Hack Bathroom & Toilet Waterproofing
A damp patch on the ceiling under a bathroom is rarely a mystery pipe. Most of the time water is passing through tired tile grout, around the floor…
See how we fix it →
Torch-On Membrane & Flat Roof Waterproofing
Torch-on membrane is a bitumen sheet that is heated with a gas torch and bonded to the concrete slab. The seams are lapped and melted together, so…
See how we fix it →
Roof Leak Repair & Roof Tile Coating
A pitched roof can leak from dozens of places: a cracked tile, a ridge with failed mortar, rusted flashing where the roof meets a wall, or a gutter…
See how we fix it →We provide pu injection work across:
Book a PU Injection Inspection
Send photos and your location on WhatsApp. We confirm the cause on site before quoting.