Industrial Epoxy & PU Cement Flooring
Epoxy, PU Cement & Micro Cement Flooring for Factories, Shops & Homes
Floors in factories, warehouses and commercial kitchens take forklifts, chemicals, hot water and constant washing. Bare concrete dusts, stains and soaks up spills. A resin floor seals the concrete and gives a surface that is easy to clean and mark out.
We lay epoxy coatings for warehouses, workshops and car parks, polyurethane-cement (PU cement) screeds for wet and hot areas such as food processing and kitchens, and decorative micro cement or metallic finishes for shops, showrooms and bathrooms. The same waterproofing know-how goes into each one, because a floor that lets water through will lift.

When Your Commercial Floor Needs an Epoxy or PU Cement System
- Concrete floors that dust, stain or absorb oil and chemicals
- Peeling paint on warehouse or car park floors
- Wet kitchens or processing areas with cracked, slippery tiles
- Floors that need clear walkway and safety line marking
- Shops and bathrooms wanting a seamless, modern finish
How We Install an Epoxy or Industrial Floor
- 1
Moisture and strength check
We test the slab for moisture and soundness, because resin floors fail on damp or weak concrete.
- 2
Grind or shot-blast
The surface is mechanically prepared to open the pores and remove laitance and old coatings.
- 3
Repair and prime
Cracks and holes are filled and a primer is applied to lock the surface.
- 4
Lay the system
Epoxy, PU cement or micro cement is applied in the specified layers and thickness.
- 5
Line marking and cure
Safety lines and zones are marked and the floor is left to cure before traffic.
Epoxy vs PU Cement vs Micro Cement: Choosing a Floor System
Epoxy coating / self-levelling
Hard, glossy and easy to clean. For warehouses, workshops, car parks and clinics.
PU cement screed
Handles hot water, thermal shock and chemicals. For kitchens and food plants.
Micro cement
Thin decorative cement finish for floors and walls in shops, homes and bathrooms.
Metallic epoxy
Decorative marbled effect for showrooms and feature floors.
Industrial Epoxy & PU Cement Flooring Prices in Puchong, KL & Selangor
Three common scopes for this service. The price that applies depends on what the inspection finds.
| Option | Small shop / bathroom | Warehouse / workshop | Food plant / kitchen |
|---|---|---|---|
| Typical price | Typical from RM1,800 | Quoted per sq ft | Quoted after inspection |
| Best for | Micro cement, small epoxy areas | Epoxy coating with line marking | PU cement for wet and hot areas |
| Moisture test before quoting | ✓ | ✓ | ✓ |
| Mechanical surface preparation | ✓ | ✓ | ✓ |
| Safety line marking | – | ✓ | ✓ |
| Final price & warranty | In written quotation | In written quotation | In written quotation |
| Exact quotation | Upon request after inspection | Upon request after inspection | Upon request after inspection |
Typical common jobs range from RM450 to RM1,800. The final price and warranty are stated in your written quotation after site inspection, based on the system and job scope (case by case). Exact quotation upon request. Any transport surcharge, if applicable, is confirmed with you during enquiry.
Epoxy & Industrial Floors Job Photos from Leak Buster Sites




Related recent jobs
Epoxy Floor Coating with Line Marking for a Workspace
Industrial epoxy floor coating with yellow safety line marking for a work area, plus a coloured coating for a sports court.
Micro Cement Bathroom and Metallic Feature Finish
Seamless micro cement on bathroom walls and floors, and a decorative metallic coating as a feature surface.
Epoxy & Industrial Floors FAQs
How long does an epoxy floor take to cure?
Light foot traffic is usually possible after about a day, and full vehicle or forklift loading after several days. Exact curing time depends on the system and temperature.
What is the difference between epoxy and PU cement flooring?
Epoxy is hard and glossy and suits dry areas. PU cement is tougher against hot water, thermal shock and chemicals, so it suits kitchens and food processing.
Can micro cement be applied over existing tiles?
Often yes, if the tiles are firmly bonded. Grout lines are filled first so they do not show through the finish.
How is industrial flooring priced?
By floor area, system and thickness, plus how much surface preparation is needed. Smaller jobs typically start from RM1,800, and warehouses are quoted per sq ft.
Related Waterproofing Services & Areas Covered
No-Hack Bathroom & Toilet Waterproofing
A damp patch on the ceiling under a bathroom is rarely a mystery pipe. Most of the time water is passing through tired tile grout, around the floor…
See how we fix it →
PU Injection Grouting & Leak Sealing
When water drips through a crack in a concrete ceiling, car porch or basement wall, the path runs through the structure itself. Painting over it does…
See how we fix it →
Torch-On Membrane & Flat Roof Waterproofing
Torch-on membrane is a bitumen sheet that is heated with a gas torch and bonded to the concrete slab. The seams are lapped and melted together, so…
See how we fix it →We provide epoxy & industrial floors work across:
Book a Epoxy & Industrial Floors Inspection
Send photos and your location on WhatsApp. We confirm the cause on site before quoting.