Recent job · Torch-On Membrane

Sanded Torch-On Membrane Laid Before Screed and Tiles

Sanded-finish torch-on membrane laid on a slab that will be covered with screed or tiles, then flood tested before covering.

Job Overview: Problem, System and Site Details

Problem
New finishes planned over a leaking slab
System used
Torch-on membrane, sanded finish
Area
Klang Valley [CONFIRM: area]
Year
[CONFIRM: year]
Size
[CONFIRM: size]
Duration
[CONFIRM: duration]

When a slab is going to be covered with screed or tiles, the membrane underneath does not see the sun, so a sanded finish is used. The sand surface gives the screed something to grip, which a mineral finish would not.

These photos show the membrane laid and then flooded. The brown water in two of the pictures is the flood test: water is held on the membrane for a period while the ceiling below is checked. Only after the test passes is the screed laid, because once the tiles go down, any weak lap is very expensive to reach.

Photos from This Job

Need Torch-On Membrane Work?

See the full torch-on membrane & flat roof waterproofing service, or send photos of your leak on WhatsApp.